Imagine being in a sweet sleep when the startling sound of your door slamming shut wakes you up. It is as bad in reality as it may sound. Whether it is the strong winds or your kids playing with the doors, there needs to be a solution to stop them from slamming shut.
If it is the issue you are facing, and you want to know how to stop a door from slamming shut, then this is the right article for you. From fixing it the right way to interesting hacks, we are going to discuss some of the best ways to avoid slamming doors within the household in this article.
So what are you waiting for? Let's see how to maintain quiet at home by vanishing the startling sounds of the slamming doors in your house.
Are you tired of putting a pillow in front of the doors so that they don't slam shut and wake you up from a nap? If yes, the following are some of the best ways by which you can completely solve this problem:
The adjustable yet spring-loaded mechanisms that automatically close the door every time it is opened are known as door closers. These are the best ways to avoid them from slamming because of strong winds. They mostly contain contain a hydraulic piston that slowly closes the door.
Slamming is not the only problem that is solved by the door closer. Things like avoiding heavy doors shutting on individuals and refraining the kids from running out of the house are also some things that make it more beneficial.
Most of the time, the door slams because of faulty installation. Therefore, you should install the door handles and hinges perfectly. With time, the hinges become loose and make the door shut on its own. Also read about, how to install door handle?
The best way to inspect the hinges is to open the door at a right angle and put a lever against the latch to determine if the door is out of the plumb or not. Then tighten up the screws, and if they are worn out, it is recommended to change them entirely to provide a permanent solution to the problem.
It is a newly introduced yet highly effective way to prevent a door from slamming. It is a foam that is attached to the door frame and helps to seal the door so that it doesn't make startling sounds when closed.
The best way to install it is to measure the length of the door frame and cut the slice of weather-stripping foam. Once you have cut it to the right length, line it to the door frame and use an external glue to attach it there. This way not only the sounds of slamming doors would be vanished but also the damage to the door frames because of it.
The pinch guard is a U-shaped device that slides over the door or the door frame. It serves as an obstacle to a slamming door. It is usually made of soft foam, which eliminates the loud and annoying noise of a slamming door.
Another way to keep a door from slamming is to make use of the door stoppers. Their base is made out of rubber, which keeps the door in place even in front of strong winds. Its installation is pretty simple. Drill a hole in the lower bottom corner of the door where you want to install it and screw it to the door to make it functional.
If you are facing the issue of door slamming even after changing the hinges, you can use felt pads on the door frame. They absorb sound vibration and vanish the noise of a slamming door.
The felt pads could be cut into small pieces and glued against the door frame. To ensure optimal efficiency, make sure to apply them to the top and bottom of the door frame.
If you want to keep the door open for ventilation purposes and don't want it slammed against the door frame, the best thing to use are the door wedges. They are usually triangular and made of hard materials. One side is thin, while the other side is quite thick.
You have to slide the thin part of the wedge under the doorway. On the other hand, the large part of the wedge creates blockage and prevents the door from moving. It can be placed at any angle under the door and is the cheapest method to solve the issue of slamming doors.
It is important to fit the door handles properly (How to fit the door handles). This is because a single loose part of it might screw up the whole door, and it may create sounds when slammed shut against the door frame. The best way to fix them is to check the screws and tighten them up on the door.
One thing to consider when installing the door handles is to align them the right way so that they don't create hindrances in the way of a closing door. If you are replacing it with an old door handle, make sure to fit the new one that has the same size and dimensions as the previous one to ensure the proper functionality.
We are sure that you now know how to stop a door from slamming shut. It is a nightmare to wake up in the middle of the night because of a startling sound coming from your door. Thus, it is important to use methods like installing door wedges, door closers, felt pads, and wooden wedges to prevent home doors from slamming and making loud noises.
You can use an adjustment door closer that closes the door slowly, even in strong winds. There are many other ways to prevent door from slamming, such as using a wedge, felt pads, and replacing the door hinges and handles.
Adjusting the door closer is pretty straightforward. Locate the adjustment screws for closing speed and the latch to set the speed with which the door should close. These screws are turned clockwise to slow down the door and counterclockwise to speed up. Thus, you can adjust them according to your requirements.
When the doors are closed, they create a slamming sound that seems annoying to many people. Thus, you can either use felt pads or a door closer to close the door quietly without making any sound. A door wedge can also be reasonable if you don't want the door to slam against the door frame and make sounds.
After some time, a door might make noises when opened and closed. This is usually because of worn-out hinges that are also rusted. Therefore, it is best to oil them or even replace them if they are too bad. This would not only vanish the door's noisiness but also make it faster in its functionality.